Availability: | |
---|---|
Quantity: | |
UL4478 Halogen Free XLPE Flat Ribbon Cable Grey PH2.0 PH2.54
Rated Voltage: 300V
Rated Temperature: 105ºC
Insulation Material: XLPE
Conductor: Tinned or Bare, Stranded or Solid Copper
Reference Standard: UL758, UL1581, C22.2 No.210
Passes UL VW-1 & CSA FT1 vertical flame test.
Uniform insulation thickness of wire to ensure easy stripping and cutting.
For internal wiring of electronic and electrical equipment and appliance.
Conductor | Insulation | Max. Cond. Resistance at 20°C (Ω/km) | |||
AWG | Construction (No./mm) | Diameter (mm) | Nom. Thickness (mm) | Diameter (mm) | |
2 | 28 | 7/0.127 | 0.23 | 0.90x1.90 | 239 |
10 | 28 | 7/0.127 | 0.23 | 0.90x12.33 | 239 |
14 | 28 | 7/0.127 | 0.23 | 0.90x17.41 | 239 |
16 | 28 | 7/0.127 | 0.23 | 0.90x19.95 | 239 |
3 | 26 | 7/0.16 | 0.23 | 0.95x6.00 | 150 |
4 | 26 | 7/0.16 | 0.23 | 0.95x7.00 | 150 |
8 | 26 | 7/0.16 | 0.23 | 0.95x12.00 | 150 |
10 | 26 | 7/0.16 | 0.23 | 0.95x20.00 | 150 |
※The above datasheet is for reference only, please refer to the final specification. |
UL4478 Halogen Free XLPE Flat Ribbon Cable Grey PH2.0 PH2.54
Rated Voltage: 300V
Rated Temperature: 105ºC
Insulation Material: XLPE
Conductor: Tinned or Bare, Stranded or Solid Copper
Reference Standard: UL758, UL1581, C22.2 No.210
Passes UL VW-1 & CSA FT1 vertical flame test.
Uniform insulation thickness of wire to ensure easy stripping and cutting.
For internal wiring of electronic and electrical equipment and appliance.
Conductor | Insulation | Max. Cond. Resistance at 20°C (Ω/km) | |||
AWG | Construction (No./mm) | Diameter (mm) | Nom. Thickness (mm) | Diameter (mm) | |
2 | 28 | 7/0.127 | 0.23 | 0.90x1.90 | 239 |
10 | 28 | 7/0.127 | 0.23 | 0.90x12.33 | 239 |
14 | 28 | 7/0.127 | 0.23 | 0.90x17.41 | 239 |
16 | 28 | 7/0.127 | 0.23 | 0.90x19.95 | 239 |
3 | 26 | 7/0.16 | 0.23 | 0.95x6.00 | 150 |
4 | 26 | 7/0.16 | 0.23 | 0.95x7.00 | 150 |
8 | 26 | 7/0.16 | 0.23 | 0.95x12.00 | 150 |
10 | 26 | 7/0.16 | 0.23 | 0.95x20.00 | 150 |
※The above datasheet is for reference only, please refer to the final specification. |