XSD Tell You: Wire And Cable Use Precautions

The cable, as one of the greatest inventions of mankind, became the logical continuation of the electric wire, and in the 19th century has been used in the naval ships of developed countries. In fact, the cable consists of a wire inside a shield made of insulating material. Today, it is a magic tool without which you can hardly imagine life today. They are used in many branches of human activity, mainly related to electricity, optics, engineering and modern power generation technologies. We cannot have electrical equipment without quality and reliable cables.

In machinery, cables are used for traction, transmission, pulling and traction forces. Because their function is to carry power, cables are in many ways in a harsh environment. They may draw energy from the surrounding electromagnetic fields and generate unwanted noise. In both cases, the results are undesirable, so there are a few tips on how to avoid this situation. The first is to keep the cables free from contamination, and the second is to lay the cables in the house as short as possible and not to make unnecessary coils longer. Fortunately, there are cables that have been developed to minimize electromagnetic induction. Of course, the cable should avoid unnecessary electric shocks to personnel and stress on the cable insulation.

The cable should be protected from any aggression. All wires used must be insulated. Cables must be placed out of the reach of children, animals, especially rodents and naughty pups. The wiring process should be carried out in the event of a power failure.

The main things to do before laying the cable

Before laying the cable, you should put on protective insulated gloves. During the cabling process, each worker should manage cables weighing no more than 35 kg instead of longer cables. All workers should be on the same side of the cable. Attention should also be paid to the use of welding cables.

First of all use special three-core cables in the welding process. The welding machine and the welding cable should be connected to the power source at a temperature below 40 degrees Celsius.

Since welding sparks can cause injuries, workers should wear special uniforms with glass shades and protective helmets to avoid eye exposure. Rubber cables have some disadvantages: they are more susceptible to physical damage: they are also more susceptible to impact and oxidation. Therefore, rubber cables should be used in areas away from sunlight. Control cables are cables consisting of two flat twisted cables and should be used with the same safety measures. Solar photovoltaic cables are used to connect solar panels and other solar power components. They are manufactured for outdoor use, so they consist of cross-linked plastic layers to withstand the sharp temperature range. At the same time, they are resistant to salt water, acids and alkaline solutions.

Well, the above is the introduction of "wire and cable use precautions", I hope it can help you! We recommend to continue to pay attention to XSD Cable, to learn more information.