Multi-core Cable in A Broken Wire How To Check The Two Methods

In order to make life better, we need to often build a variety of different buildings, large project works, these various very hard, but we built, after laying wire and cable is also very hard, wire and cable need more and more expensive, many construction groups to buy wire and cable are limited, almost all are saving with, multi-core cable for a variety of machines is more suitable for a cable; in the case of cable is not much The case of laying is also more urgent, well installed but found that some machines can not transmit power, is a toss in vain?

This situation generally requires a good investigation, which wasted a lot of time, yes, the laying of a good cable there are many machines do not respond, it is clear that a short circuit somewhere, who can judge out, generally multi-core cable is broken a conductor line, so how to check it? Such a problem is estimated not once, many people have encountered, here we take a look at the multi-core cable in a broken line how to check the two methods.

Multi-core cable in a broken line how to check

Method one

The simplest method is to manually add the naked eye troubleshooting method, this method is suitable for use in a slightly more rigid multi-core cable, a relatively simple method, the first choice is to use the hand a section of a slight bending of the cable for testing, if you find a section of the curvature is not the same can quickly find the fault breakpoint, you can cut the wiring, or through the multi-core cable inside the different colors of the conductor --test, found that the current is abnormal that basic is the fault.

Method two

Method requires the necessary a tester, first of all, the broken cable conductor core energized, test with a tester, will find that the voltage induced on both sides of the broken line is not the same. After measuring the normal capacity, then measure the bad capacity, and finally the middle of the cable will be disconnected, again detect the disconnected end, and continue to divide the fault detection in two can be, carefully repair it.

Well, the two related to multi-core cable broken a line how to check the method hope to help you, if you still want to know more information on our XSD Cable official website, the follow-up will be regularly updated for you more related cable news information! As a high-quality multi-core cable manufacturer, XSD has been to our new and old customers to provide a variety of wire and cable and attentive service, such as the need to suggest contact us!