XSD Cable: In-depth Analysis of The Impact of The Weather on Poor Quality Photovoltaic Cables

Turning eyes, about to step into July, and the hottest summer of the year, the weather is unstable is one of the characteristics of seasonal changes, but also a major test of the quality of photovoltaic cable, if the cable quality is not good, coupled with the changing weather, it is easy to cause accidents. The following, XSD cable will be here for your in-depth analysis of the weather on the photovoltaic line which have several kinds of impact, take a look at it.

1, High temperature phenomenon

July summer, high temperature is very common, the hottest temperature can be as high as 40 degrees, the cable in the process of use will also generate heat due to thermal effects, if the cable continues to work at high temperatures, will accelerate the aging of the insulation layer, resulting in cracking of the insulation layer, peeling and other phenomena, this situation is mostly seen in exposed cables or outdoor use of photovoltaic wire, concealed although not directly exposed to high temperatures, but if the cable used in Copper is not good, it will lead to the heat generated can not be distributed in a timely manner, so that the insulation layer still has the tendency to aging.

2, Low temperature phenomenon

In the winter, especially in the northern part of the region, the outdoor temperature is often below zero, the surface temperature may be even lower, so if the cable is placed outdoors or directly on the ground, will most likely lead to the product sheath will fall off, because the general photovoltaic line products for the outer skin of ordinary plastic (PVC) or rubber, when they are in a low temperature below zero degrees Celsius environment, it will make the cable freeze and harden, In turn, the entire photovoltaic cable product line will become hard and brittle, if a slight external force is likely to happen its products off or damaged.

3, Rainstorm phenomenon

In the rainy season, after a rainstorm will be accompanied by a period of wet environment, if the quality of photovoltaic cable is not up to standard, it is very in a large degree during the production of bad workmanship, not superb, the final factory may come with a variety of defects, if the photovoltaic cable if a long time in a wet environment, there is a high probability of "water tree aging "phenomenon, the final cable insulation layer is broken, there may be electrical leakage, serious electric shock, fire and other serious accidents.

Said so much about the weather factors affecting the operation of poor quality photovoltaic cable you get it, at the same time if you want to know more about the cable information can be viewed in detail through the official website of XSD cable, the follow-up will also be pushed more related news and information, please pay attention to ~